Facebook pixel
24/7 Custom Service
Toll Free: +1 866 752 5959 | Phone: +1 416 752 5959

What are drain cleanouts and why do you need them?

What is a drain cleanout?

A drain cleanout is a plumbing fixture used to clear clogs in a home’s drainage system. It typically consists of a cap or plugs that provides access to clean out the pipes and remove any blockages caused by debris, hair, dirt, grease, or another buildup. Cleanouts are usually located either outside at an exterior wall near the pipe that exits the house or inside near fixtures such as sinks and bathtubs. The cleanout allows plumbers or homeowners to quickly unclog drains rather than having to excavate into the pipeline itself.

But what if I don’t have a drain cleanout?

If you don’t have a drain clean out, the next course of action would be to check your local plumbing codes. Depending on where you live, there may be regulations in place that require certain types of clean outs in order for plumbing systems and drainage to function properly. If no clean out is installed, reach out to a licensed plumber who can provide advice on how best to proceed with making repairs or clearing the clog.

Not all homes have a clean out for the sewer system. Depending on the age of the house and local plumbing codes, clean outs may or may not be required. In older homes, clean outs were often omitted due to cost or lack of knowledge of their importance. Newer homes typically come equipped with clean outs that are located by the main sewer line at various points in the house. The clean out allows access to clear away blockages and quickly diagnose issues without having to dig up parts of the yard. Sewer clean outs are important as they allow for simpler maintenance and repairs that can save time, money, and hassle.

How do I locate the sewer cleanout?

The sewer cleanout is typically located near the foundation of your home, often near the front or side of the house. It is usually a round or rectangular PVC pipe that sticks out of the ground with a cap on it. If you look around in those areas outside your home, you should be able to locate it. You may also check with your local plumbing department for help in locating the cleanout.

Locating Indoor Sewer Line Cleanouts

Having clean pipes is essential for any plumbing system. To make sure your drainage system remains clean and well-maintained, it’s important to clean out the indoor drain cleanout periodically. This involves locating the cleanout, which is typically found near where the main sewer line enters your home.
To locate the cleanout, start by looking in the basement or crawl space of your house. The cleanout will most likely be a capped pipe that sticks up out of the ground near the foundation wall. It could also be located along an exterior wall or near a floor drain. If you’re still having trouble finding it, try following your main sewage line with a flashlight until you find its entry point into your home.

Once located, use a wrench to loosen and remove the cap from the cleanout pipe. Make sure you have a bucket handy to catch any water that may come out when you open up the pipe. Inside should be a metal rod with either a pointy end or an auger blade at one end to help scrape away any buildup inside of the pipe. Insert this cleaning tool into the cleanout pipe and rotate it back and forth until all debris is clear from within. Finally, remove any debris from inside of the bucket, put back on the cap, and you’re done!

Locating Outdoor Sewer Line Cleanouts

One of the most important tasks that a homeowner should undertake is locating cleanouts for their outdoor sewer line. Cleanouts are access points that allow an experienced plumber to clean out accumulated debris from plumbing drains and keep them flowing freely. Without cleanouts, a clogged drain can cause costly damage to your home’s plumbing system.

Cleanouts are usually located near the edge of your property where the sewer line leaves your property. They generally look like round or rectangular plastic or metal lids with caps on the top, sometimes labeled “sewer cleanout” or “roof drain cleanout” depending on their location. If you have trouble finding cleanouts, you can contact a licensed plumber to help you locate them and make sure they are properly maintained.

It is also important to note that there may be several cleanouts in a single plumbing system, so it is important to know which cleanout is connected to which plumbing fixture in order to avoid any confusion when attempting repairs or maintenance. Furthermore, it is important to know where they are located and how they work before attempting any cleaning or repair work yourself as improper use of cleanouts can lead to further damage in your plumbing system.

What if I don’t have a sewer clean-out?

If you don’t have a clean out for your plumbing drain, it is possible to clean it out yourself. You can use a plumbing snake or auger to clean out the drain and remove any blockages that may be present. Additionally, it is also helpful to use a quality cleaner to flush out any dirt and debris that has settled into the pipes. It is important to make sure you wear protective gear and take all necessary safety precautions when dealing with plumbing clean outs. It is also important to contact a professional if the clean out requires working underground or in difficult-to-reach areas.

A step-by-step guide on how to plumb drain clean out

Remove Potential Drain Clogs

When it comes to clean out a plumbing drain, the first step is to remove any potential clogs. To do this, start by shutting off the water supply and then remove the clean-out plug from the clean-out fitting on the side of the drain pipe. If water is present in the clean-out fitting, use a bucket or basin to catch it before removing the clean-out plug.

Next, use a plumber’s snake equipped with an auger bit to try and dislodge any clogs that may be stuck in the piping. Insert the auger into the clean-out fitting, maneuvering it around until you reach what you believe is the obstruction. Once you have reached it, turn on the auger so that it can break up and extract any debris that may be blocking the line.

If using a plumber’s snake proves unsuccessful in removing whatever blockage is present in your piping, another method that can be used is called hydro jetting. This involves sending pressurized water down into your plumbing lines to clear out any blockages inside them. It’s important when doing this type of work to make sure that all fittings are tight and secure as well as ensuring that all safety protocols are followed closely.

Once you have cleared out all possible obstructions, reinstall your clean-out plug and turn back on your water supply and check for leaks or other signs of damage. If everything looks good and there are no more clogs present in your plumbing lines then your plumbing clean out procedure has been successful!

Banish Foul Odors

A clean out drain is a plumbing appliance that helps to keep the plumbing system clean and odor-free. It is typically located outside the home near the sewer line, and it serves as an access point for homeowners to clean debris, grease, and other materials from the system’s drains. Cleaning out your drain regularly can help eliminate odors caused by bacteria buildup and ensure that your plumbing system is running smoothly. Here’s a step-by-step guide on how to clean out your drain:

1. Locate the clean out drain – The clean out drain is usually located at the edge of your property near the sewer line or septic tank.

2. Check for clogs – Before you begin, check for blockages in the clean out line by unscrewing or removing the cap or plug from the cleanout pipe. If you see any debris, remove it with a plunger or snake so that water can flow through freely.

3. Attach a hose – Connect one end of a garden hose to an outdoor faucet located close to your cleanout pipe, then attach the other end of the hose to a Y-fitting connected directly to the cleanout pipe. Make sure to secure all connections with plumber’s tape before turning on the faucet.

4. Flush away dirt and debris – Turn on the faucet slowly until water starts flowing into your cleanout line and flush away any dirt, grease, or debris in there. This will help reduce odors caused by bacteria buildup in your plumbing system while ensuring proper drainage and flow throughout your pipes.

5. Disconnect hose – After flushing away all dirt and debris, turn off the faucet and disconnect both ends of your garden hose from both faucets and cleanouts line respectively before removing them from each other’s fittings using plumber’s tape if necessary.

6 Test for smooth flow – Once everything is disconnected properly, test for smooth water flow in each fixture throughout your home before replacing caps or plugs removed from cleanouts lines anytime during this process back into place securely with plumber’s tape if needed so no additional dirt or debris can get into access points in Plumbing System .

Following these steps should help keep bad odors from accumulating inside of your plumbing system while also allowing it to function properly at all times!

Prevent Future Drain Clogs

When it comes to plumbing clean out drains, avoiding future clogs is key. Fortunately, with the right steps and a bit of patience, clean out drain maintenance can be easy. Here are some tips on how to properly clean out your drains and prevent future clogs:

1. Remove Debris: Start by removing any debris that has accumulated in your clean out drain. This may include dirt, grease, food particles, hair, or other items that have found their way into your clean out drain. Use a pair of pliers or a small handheld vacuum to remove this debris from the clean out drain opening.

2. Check for Leaks: Make sure there are no leaks in the clean out drain line by inspecting all joints and connections for signs of water damage or corrosion. Replace any hoses or pipes that appear worn or damaged in order to prevent potential leakages in the future.

3. Use Hot Water: Pour hot water down the clean out drain on a regular basis to help dissolve any build-up of grease or soap scum within the pipes. This will also help ensure that no organic materials become stuck to the inside walls of your cleanout drain pipe as they travel through it.

4. Clean Drains Regularly: Clean your cleanout drains at least once per month (more often if necessary) using a combination of baking soda and vinegar – both natural cleaning agents that can effectively break down blockages and keep your drains free-flowing for longer periods between cleanings.

5. Use Drain Covers: Install drain covers over your cleanout drains to trap large particles before they can enter the pipe and cause issues further down the line – especially helpful for showers, tubs, sinks, and toilets where hair accumulation is more common.

Following these simple tips will help you maintain an efficient plumbing system by keeping your cleanout drains clear and well-maintained to prevent future blockages and clogs

Drain Express

Drain Express specializes in cleaning out drain services for all types of plumbing. Our professional team of certified technicians have years of experience in providing cleanouts, allowing drains to operate at peak performance. We use advanced tools and techniques to clean out slow, clogged drains and remove any buildup of dirt or debris. Our clean out services are designed to clean deeply and thoroughly, ensuring that your plumbing system is free from blockages and other problems. With Drain Express, you can trust us to deliver superior clean out results that last long-term.

Drain Express is the perfect choice for your plumbing repair or sewer inspection needs. We offer clean out services for any type of drain, including kitchen sinks, bathtubs, showers, and laundry drains. Our experienced plumbers use high-quality tools to clean out your drains quickly and efficiently. They can also identify potential issues and provide advice on how to prevent future problems. With our clean out services, you can rest assured that your plumbing system will be well-maintained and free of clogs. So don’t wait – get in touch with Drain Express today for reliable plumbing clean out services.

Contact Details
Email: info@drainexpress.ca

+1 647 247 0846
+1 866 239 5480

Our Location
300 New Toronto St #14,
Etobicoke, ON, M8V 2E8

24/h Customer Service
We are open 24/7
Contact us at any time



Basement Flooding Even With a Sump Pump: How to Solve This Problem?

Introduction: Sump Pump = Flooded Basement? Many homeowners worry about sump pump flooded basement despite installing a basement sump pump. This persistent issue threatens home structural integrity and promotes mold development and other water-related concerns. A flooded basement can cause significant financial losses and health dangers, so fixing this issue is crucial. Even with a […]

water powered sump pump


Evaluating the Efficiency of Water Powered Sump Pumps: Are They Worth It?

Sump pumps play a critical role in protecting homes from sump water damage, particularly in areas susceptible to flooding or heavy rains. They effectively remove water that has accumulated in basements or crawl spaces, safeguarding the structural integrity of the house. Traditionally, homes rely on electric sump pumps, but an alternative exists in the form […]

Load More

Sign Up for News and Updates

Sign up now and be the first to know about exclusive offers, exciting news and announcements.